ACT-IR110SD
(Embedded RS232 Adapter with IrPHY+Protocol, Selectable Host Baud Rate; Battery Operated)
Click for detailed spec.
-- Description --
Supports mandatory IrDA layer: IrPHY, IrLAP, IrLMP and IAS.
Supports upper layers TinyTP, IrCOMM, IrLPT, and OBEX transport.
Supports host baud rate from 1.2 kbps to 115.2 kbps, which is changeable by utility; IrDA baud rate from 9.6 kbps to 115.2 kbps, which is flexible setting by IrDA devices.
Supports both IrDA Primary and Secondary mode, changeable via Comset_IR100SD.exe.
[Factory Default Setting]: Baud rate =115.2k bps;8N1
Battery operated intelligent adaptor; Optional AC power adapter available.
No driver is needed.
IR frame and Host buffer are 2048 bytes separately.
Supply voltage: 6.0 V to 12 V.
Power consumption: 1.650 mA on standby mode, 60 mA on active mode.
Supports 3 wires host interface (Tx, Rx and GND).
Interface to Host:
- Full duplex asynchronous serial (TXD, RXD)
- Hardware flow control (RTS, CTS)
- Optional line status for link control (DTR, DSR)
[ Home Page | About ACTiSYS | Contact us | IrDA Products | Tutorials | IrDA Test Center | Compatibility |
Order | Price Quote | Technical Support | Downloads | Track a Package | Jobs | Feedback | Privacy | Terms ]
ACTiSYS CORP.
|
921 Corporate Way
|
Fremont, CA 94539
Tel: +1-510-490-8024
|
Fax: +1-510-623-7268
irda-info@actisys.com
©
1996-2019 ACTiSYS Corporation,
All Rights Reserved
